|
We1P - Honorary Plenary Lectures 1, 2
|
|
|
We1P-1 P00262 (13:50 ~ 14:30) |
[Honorary Plenary Lecture 1] Doosan's Preparation for SMR Success: The Current Status and Plan for Component Design and Manufacturing | |
| Dongsoo Lee* (Doosan Enerbility) | ||
|
We1P-2 P00264 (14:30 ~ 15:00) |
[Honorary Plenary Lecture 2] The Higher Education in Tanzania & Africa | |
| Dong Ho Bae* (United African University of Tanzania) | ||
|
We1B - Plenary Lectures 1, 2
|
|
|
We1B-1 P00268 (15:20 ~ 16:00) |
[Plenary Lecture 1] Recent Topics and Current Problems in Flaw Evaluations for Plant Components | |
| Kunio Hasegawa* (Japan Atomic Energy Agency) | ||
|
We1B-2 P00265 (16:00 ~ 16:40) |
[Plenary Lecture 2] Reliability and Maintenance of Floating Offshore Wind Turbines | |
| He Li* (Liverpool John Moores University) | ||
|
We2A - Fatigue I
|
|
|
We2A-1 P00141 (09:00 ~ 09:20) |
Effects of Rare Earth Elements on Fatigue Behavior of Magnesium Single Crystals | |
| Shinji Ando* and Hiromoto Kitahara (Kumamoto University) | ||
|
We2A-2 P00156 (09:20 ~ 09:40) |
Effect of Compressive Load Level on the Very Low-Cycle Fatigue Behavior under Load-controlled Cyclic Loading | |
| Sang Eon Kim and Jin Weon Kim* (Chosun University), Jong Sung Kim (Sejong Unviersity) | ||
|
We2A-3 P00013 (09:40 ~ 10:00) |
Effect of H2O and H2S Impurities on Hydrogen Embrittlement of SCM435 Low-Alloy Steels | |
| Masanobu Kubota* and Juan Shang (Kyushu University), Ryosuke Komoda (Kyushu Institute of Technology & Kyushu University), Shunsuke Umezaki and Tatsuhito Masuda (Graduate School of Mechanical Engineering), Yussalla Vanadia, Nao Inoue, Hioshi Okano, Tomoharu Ishida, and Shusaku Takagi (JFE steel Corporation) | ||
|
We2A-4 P00037 (10:00 ~ 10:20) |
Simple Method for Predicting Accumulated Plastic Strain of Ultrasonic Nanocrystal Surface Modification | |
| Taehyeon Seok, Ju-Won Choi, and Nam-Su Huh* (Seoul National University of Science and Technology) | ||
|
We2A-5 P00033 (10:20 ~ 10:40) |
Analysis on Microstructure and Mechanical Properties of Mod.9Cr-1Mo Steel | |
| Ki-Ean Nam (KAERI), Hyeong-Yeon Lee* and Jae-Hyuk Eoh (Korea Atomic Energy Research Institute), hyungmo Kim (Gyeonsang National University), Hyun-Uk Hong (Changwon National University) | ||
|
We2A-6 P00014 (10:40 ~ 11:00) |
Fatigue Behavior of Multi-Directionally Forged CP Ti and the Effect of Notch Stress Concentration | |
| Takeshi Sato (Gifu University), Hiromi Miura (Toyohashi University of Technology), Yoshihiko Uematsu* (Gifu University) | ||
|
We2A-7 P00125 (11:00 ~ 11:20) |
Investigation of Dislocation Movement Under Electron Wind Force: An In Situ TEM Study | |
| Xinming Yan, SHAOJIE GU, and YASUHIRO KIMURA (Nagoya University), YANG JU (Zhejiang University), YUHKI TOKU* (Nagoya University) | ||
|
We2B - Fracture & Failure I
|
|
|
We2B-1 P00114 (15:20 ~ 15:40) |
Impact of Excess Electrons and Holes on Fracture Toughness of Amorphous Silica | |
| Wataru Matsunaga*, Seiya Shichino, Takumi Takahashi, and Hiroyuki Hirakata (Kyoto University) | ||
|
We2B-2 P00237 (15:40 ~ 16:00) |
Analysis of Plastic Collapse Load for Non-Defective Elbows Under Three-Way Combined Loading: Internal Pressure, In-Plane Bending, and Out-of-Plane Bending | |
| Dong-Jun Kim, Sang Hyuk Park, and Seok-Pyo Hong* (Sejong University) | ||
|
We2B-3 P00149 (16:00 ~ 16:20) |
Effect of Reinforcement on the Fracture Surface of Precipitation Hardened LM4 Hybrid Composites | |
| D Srinivas, Gowrishankar M C*, Nitesh Kumar, Manjunath Shettar, and Syed Mansoor (Manipal Institute of Technology) | ||
|
We2B-4 P00072 (16:20 ~ 16:40) |
Mechanical Evaluation of Localized Interlayer Slip Strength in van der Waals-Layered Materials | |
| Shiyu Oga, Wataru Matsunaga, and Hiroyuki Hirakata* (Kyoto University) | ||
|
We2B-5 P00131 (16:40 ~ 17:00) |
Evaluation of Stress Intensity Factor in Polyhedral Mesh Using Virtual Element Method (VEM) and Virtual Grid-based Stress Recovery (VGSR) Technique | |
| Jongyeop Kim and Nastaran Movahedi (Yonsei University), Dongwoo Sohn (Korea Maritime & Ocean University), Kyoungsoo Park* (Yonsei University) | ||
|
We2B-6 P00198 (17:00 ~ 17:20) |
Data-Driven Methods for Predicting of the Mechanical Response of Polycrystalline Graphene Using a Deep Convolutional Neural Network with PCA | |
| Wonjun Shin, Seongwoo Jang, and Jihoon Han* (Jeonbuk National University) | ||
|
We3A - PHM for Electronics and Electrical Systems
|
|
|
We3A-1 P00024 (09:00 ~ 09:20) |
Electrical Chatter Characteristics of a Rough Electrode under Dynamical Loading | |
| Benjamin Dakestreiter (Texas Tech University), Robert Kuether (Sandia National Laboratory), Chang-Dong Yeo* (Texas Tech University) | ||
|
We3A-2 P00052 (09:20 ~ 09:40) |
A Hybrid Remaining Useful Life Prediction Method for Wear Failure with Bootstrap Framework and Wavelet Convolutions | |
| Zixing Huang, Ziwei Xu, Zhiming Deng, Yan-Feng Li, and Hong-Zhong Huang* (University of Electronic Science and Technology of China) | ||
|
We3A-3 P00168 (09:40 ~ 10:00) |
Digital Signal-Based Method for Interconnects Failure Diagnosis Robust to Use Condition | |
| Geunil Lee and Daeil Kwon* (Sungkyunkwan University) | ||
|
We3A-4 P00150 (10:00 ~ 10:20) |
Piezoresistive Pressure Sensor Array to Measure Plantar Shear Stress and Pressure for Gait Analysis | |
| Seyong Jung and Quang Van Duong (Chung-Ang University), Dearang Shin and Juntae Kim (Polyworks), Giuk Lee and Seung Tae Choi* (Chung-Ang University) | ||
|
We3A-5 P00049 (10:20 ~ 10:40) |
Bearing Remaining Useful Life Prediction with Conditional GAN-Augmented Data and Visual Transformer | |
| Ziwei Xu, Zhiming Deng, Zixing Huang, Hua-Ming Qian, Yan-Feng Li, and Hong-Zhong Huang* (University of Electronic Science and Technology of China) | ||
|
We3A-6 P00110 (10:40 ~ 11:00) |
High-Frequency Electromagnetic Sensing Method for Water Leakage Prediction of Concrete Structure | |
| Changhyeon Kim, Young-Dae Shim, and Jihun Kim (Sungkyunkwan University), Ja-Uk Gu (Samsung Electronics), Eun-Ho Lee* (Sungkyunkwan University) | ||
|
We3A-7 P00069 (11:00 ~ 11:20) |
Crazing-Image-Assisted Neural Network (CIANN) for Predicting Nonlinear Mechanical Behaviors of Freestanding Ultra-Thin Polymer Films | |
| Myoung Song (KAIST), Haebom Lee (AIMMO Germany GmbH), Sungho Suh (German Research Center for Artificial Intelligence (DFKI)), Seung Jin Oh (KIMM), Won Choi (KAIST), Tae Yeob Kang (University of Suwon), Taek-Soo Kim* (KAIST) | ||
|
We3B - [Mini Symposium] Reliability and Optimization for Naval Systems
|
|
|
We3B-1 P00253 (15:20 ~ 15:40) |
The Naval Ship Vulnerability Assessment Method for Distributed System Component at the Initial Design Stage | |
| Myo Jung Kawk and Seungmin Kwon (Hanwha Ocean), Yoon-Ho Shin and Yoojeong Noh* (Pusan National University) | ||
|
We3B-2 P00232 (15:40 ~ 16:00) |
Learning-Based Failure Prediction in S/W Regression Testing with Application to Ship-Engine Control Test | |
| Sanghyeon Lee (UNIST), Jusang Lee and Cheolhyeon Kwon* (Ulsan National Institute of Science and Technology) | ||
|
We3B-3 P00223 (16:00 ~ 16:20) |
Automatic-Adaptive DBSCAN Based Rotor Balancing Algorithm for a High-Precision & Reliable Rotor System | |
| Dong-heon Yang, Sang-heon Lee, and Yun-ho Shin* (Pusan National University) | ||
|
We3B-4 P00208 (16:20 ~ 16:40) |
Optimal Sensor Placement for Digital Twin Model to Predict Hull Structural Response of Naval Ship | |
| Seungyoung Lee and Kyoungtae Kim (Korean Register), Yun-ho Shin (Pusan National University), Keunbok Song (HD Hyumdai Heavy Industries), Yoojeong Noh* (Pusan National University) | ||
|
We4A - Advanced Materials I
|
|
|
We4A-1 P00167 (09:00 ~ 09:20) |
Graphene-enabled Laser Lift-off for Ultrathin Optoelectronic Devices | |
| Sumin Kang* (Seoul National University of Science and Technology) | ||
|
We4A-2 P00184 (09:20 ~ 09:40) |
Strain Sensing Ability in an Amorphous Semiconductor Thin Film on a Compliant Substrate | |
| Yinli Wang* and Hiroyuki Hirakata (Kyoto University), Yuji Sutou (Tohoku University) | ||
|
We4A-3 P00126 (09:40 ~ 10:00) |
Polymerization Induced Phase Separation for Layered Structures in Soft Gels | |
| Vibhanshu Maurya and Insu Jeon* (Chonnam National University) | ||
|
We4A-4 P00077 (10:00 ~ 10:20) |
Optimizing Hybrid Glycerogels with the Hofmeister Effect for Superior Wide-Temperature Shape Fixity and Recovery | |
| Mona Janipour Shahroudkolaei (Chonnam National university), Insu Jeon* (Chonnam national university) | ||
|
We4A-5 P00021 (10:20 ~ 10:40) |
Multifunctional Glycerogels for On-Demand Energy Harvesting in Extreme Environments | |
| Nitha Mary George (Chonnam National University), Insu Jeon* (Chonnam National University, Gwangju, Republic of Korea) | ||
|
We4A-6 P00106 (10:40 ~ 11:00) |
Mechanical Control of Electro-Mechanical Response in 2D Materials | |
| Seita Katayama*, Yuto Ioki, Wataru Matsunaga, and Hiroyuki Hirakata (Kyoto University) | ||
|
We4B - [Mini Symposium] Trends in Eco-Friendly Shipbuilding and Marine Echnology
|
|
|
We4B-1 P00256 (15:20 ~ 15:40) |
Numerical Analysis of Cooling Phenomenon for the Concentric Double Pipe Heat Exchanger | |
| S. W. Lee and SungWoong Choi* (Gyeongsang National University) | ||
|
We4B-2 P00254 (15:40 ~ 16:00) |
Research Trends and Project Planning Status of Eco-Friendly Ships in the Shipbuilding and Marine Industry | |
| Youngki Kim, Taehyun Lee, Youhee Cho, and Yongjin Kim* (KIMM) | ||
|
We4B-3 P00196 (16:00 ~ 16:20) |
Optimum Arrangement of the Propulsion Shafting System for a Large Scale Crude Oil Tanker Equipped with the Shaft Generator | |
| Yanggon Kim* (Mokpo National Maritime University), Youhee Cho (Korea Institute of Machinery & Materials), Youngchul Lee (Mokpo National Maritime University) | ||
|
We4B-4 P00260 (16:20 ~ 16:40) |
Marine Liquid Hydrogen Projects of Korea | |
| Jeong-Hyeon Kim*, Tae-Wook Kim, Dong-Ha Lee, and Jae-Myung Lee (Pusan National University) | ||
|
We4B-5 P00221 (16:40 ~ 17:00) |
Development of a 3D Gaussian Splatting Digital Twining Platform for Remote Ship Assessment | |
| Jeewon Lee (SUNY Korea Stony Brook), Hansol Lim (SUNY Korea), Jongseong Choi* (SUNY Korea Stony Brook), Sangho Song, Jaechul Park, and Hwasup Jang (Korean Register) | ||
|
We5A - [Mini Symposium] Advanced Modeling and Simulation for Enhancing Reliability in LG Home Appliance & Air Solution
|
|
|
We5A-1 P00236 (09:00 ~ 09:20) |
Synthetic Data Augmentation for Washing Machine Performance Prediction Using Graph Algorithm | |
| Jaehyun Jung, Yoojeong Noh*, and Young-jin Kang (Pusan National University), Han Kim and Byungju Min (LG Electronics) | ||
|
We5A-2 P00234 (09:20 ~ 09:40) |
Copula-Based Synthetic Data for Sequential Multivariate Prediction of Vibration Distribution in Washing Machine Spin-Drying | |
| Dahye Yoo, Yoojeong Noh*, and Youg-Jin Kang (Pusan National University), Daekil In, Jun-su Park, and Jung-Hoon Cho (LG Electronics) | ||
|
We5A-3 P00164 (09:40 ~ 10:00) |
Simplified Stress Evaluation Method Using 1D Beam Model for Piping System Design of Air Conditioner Outdoor Unit | |
| Jae-Yoon Kim, Jun-Won Park, and Yun-Jae Kim* (Korea University), Jin-Ha Hwang (Pukyong National University), Ki-Woong Park (LG Electronics) | ||
|
We5A-4 P00153 (10:00 ~ 10:20) |
Real-Time Monitoring of Thermal Elastic Deformation of a Silicon Wafer with Sparse Measurements in the Photolithography Process Using a Physics-Informed Neural Network and Fourier Neural Operator | |
| Hong-Kyun Noh and Jae Hyuk Lim* (Jeonbuk National University) | ||
|
We5A-5 P00068 (10:20 ~ 10:40) |
Fatigue Damage Evaluation Method for Piping Systems in Inverter Driven Air Conditioners under Random Frequency Control | |
| Ho-Jun Jang and Chan-Hyeong Chung (Seoul National University of Science and Technology), Ki-Woong Park (LG Electronics), Nam-Su Huh* (Seoul National University of Science and Technology) | ||
|
We6A - Nuclear Industry
|
|
|
We6A-1 P00226 (09:00 ~ 09:20) |
A Study on Structural Analysis Methodologies to Account for the Hydraulic Loads on Reactor Vessel Internals | |
| Chiwoong Ra, Hyungyu Roh, Jeonghyun Kim, and No-cheol Park* (Yonsei University) | ||
|
We6A-2 P00183 (09:20 ~ 09:40) |
Evaluation of Mechacnical Cumulative Damage in Dry Storage Containers | |
| Hyungyu Roh, Chiwoong Ra, and No-Cheol Park* (Yonsei University) | ||
|
We6A-3 P00079 (09:40 ~ 10:00) |
On the Applicability of ASME B&PV Code Section XI Stress Intensity Factor Solution to the Flaws in the Center of an Elbow | |
| Seok-Jun Yoon and Nam-Su Huh* (Seoul National University of Science and Technology) | ||
|
We6A-4 P00192 (10:00 ~ 10:20) |
A Study of Multi-Pass Weld Finite Element Analysis Using Measuring Residual Stress and Accumulative Plastic Strain | |
| Chang-Young Oh*, Jun-Young Jeon, Chankyu Kim, Kyungsik Ha, and Sangwoo Song (Korea Institute of Materials Science (KIMS)) | ||
|
We6B - [Mini Symposium] Data-driven & Physics-informed Machine Learning for Digital Twin, Surrogate Modeling, and Model Discovery
|
|
|
We6B-1 P00152 (15:20 ~ 15:40) |
Real-Time Prediction of the Transient Response of Dynamic Systems using a Causal PINN-based Surrogate Model | |
| Hong-Kyun Noh and Jae Hyuk Lim* (Jeonbuk National University) | ||
|
We6B-2 P00222 (15:40 ~ 16:00) |
Runge-Kutta Neural Networks as PINN Alternative | |
| Hansol Lim (SUNY Korea), Jeewon Lee (SUNY Korea Stony Brook), Jonathan Boyack and Jongseong Choi* (SUNY Korea) | ||
|
We6B-3 P00133 (16:00 ~ 16:20) |
Geometry-adaptive Physics-informed DeepONet for Fluid Dynamics | |
| Jongmok Lee (POSTECH), Bumsoo Park and Seungchul Lee* (Korea Advanced Institute of Science and Technology) | ||
|
We6B-4 P00096 (16:20 ~ 16:40) |
Fourier Feature Embedded Neural Network for Operational Transfer Path Analysis | |
| Jeongmin Oh (GIST), Jungyu Lee and Hyunseok Oh* (Gwangju institute of science and technology), Kyung Woo Lee, Youngrock Chung, and Dae Un Sung (Hyundai Motor Company) | ||
|
We6B-5 P00176 (16:40 ~ 17:00) |
A Forward/Inverse Problem of Dynamics Responses in a Beam/Plate System with a Causal Physics-Informed Neural Network | |
| Jeong-Hoon Park (Jeonbuk National University), Hong-Kyun Noh and Jae Hyuk Lim* (Jeonbuk national university) | ||
|
We6B-6 P00116 (17:00 ~ 17:20) |
Deep Learning-based Inverse Design of Acoustic Scatterer Integrating Physical Consistency | |
| Keonhyeok Park (POSTECH), Soo Young Lee (Pohang University of Science and Technology), Hyung Jin Lee and Choon-Su Park (Korea Research Institute of Standards and Science), Seungchul Lee* (Korea Advanced Institute of Science and Technology) | ||
|
We6B-7 P00076 (17:20 ~ 17:40) |
Deep Learning Based Loose Parts Monitoring System for Three-Dimensional Structures | |
| Jungsik Choi (GIST), Jeongmin Oh and Hyunseok Oh* (Gwangju Institute of Science and Technology) | ||
|
We6B-8 P00073 (17:40 ~ 18:00) |
Physics-Guided Deep Neural Network for State of Health and Remaining Useful Life Predictions of Lithium-Ion Batteries with a Framework of Accelerated Degradation Experiments | |
| Taegyu Jang and Ki-yong Oh* (Hanyang University) | ||
|
Th1A - Plenary Lectures 3, 4
|
|
|
Th1A-1 P00139 (09:00 ~ 09:40) |
[Plenary Lecture 3] Mechanical Reliability of Thin Film Materials for Semiconductors, Displays and More | |
| Taek-Soo Kim* (KAIST) | ||
|
Th1A-2 P00267 (09:40 ~ 10:20) |
[Plenary Lecture 4] Strength Reliability of Natural Fiber Green Composites | |
| Koichi Goda* (Yamaguchi University) | ||
|
Th1P - Honorary Plenary Lecture 3
|
|
|
Th1P-1 P00263 (13:00 ~ 13:40) |
[Honorary Plenary Lecture 3] Structural Health Monitoring for Reliability of Autonomous Systems | |
| Fu-Kuo Chang* (Stanford University) | ||
|
Th1B - Plenary Lectures 5, 6
|
|
|
Th1B-1 P00270 (13:50 ~ 14:30) |
[Plenary Lecture 5] Explainable AI for Risk Management of Aero-Engines under Uncertainty | |
| Yiming Zhang* (Zhejiang University) | ||
|
Th1B-2 P00010 (14:30 ~ 15:10) |
[Plenary Lecture 6] Prognostics and Health Management with Model-Based System Engineering and Generative Industrial Artificial Intelligence | |
| Jongsoo Lee* (Yonsei Univeersity) | ||
|
Th2A - Fracture & Failure II
|
|
|
Th2A-1 P00063 (09:00 ~ 09:20) |
Effect of Hydrogen on the Mechanical Properties of GB20# Pipeline Steel in Hydrogen-Blended Natural Gas | |
| Juan Shang* (Kyushu University / WPI-I2CNER), Ruizhe Gao and Zhengli Hua (Zhejiang University) | ||
|
Th2A-2 P00018 (09:20 ~ 09:40) |
A Finite Element Simulation on Development of Damage in SUS304 during Small Punch Test by Introducing Modified Johnson-Cook Model | |
| Takeshi Iwamoto* (Hiroshima University), Chong Gao (Ritsumeikan University), Tsutomu Umeda (Osaka Metropolitan University) | ||
|
Th2A-3 P00109 (09:40 ~ 10:00) |
Recent Advancements in Atomistic Simulations for Investigating the Interfacial Damage Mechanisms in Graphene-reinforced Nanocomposites: Literature Review and a Preliminary Study | |
| Jin-Ho Bae (KAIST), S. Y. Moon (Korea Advanced Institute of Science and Technology), T. G. Kil (Agency for Defense Development), H. K. Lee* (Korea Advanced Institute of Science and Technology) | ||
|
Th2A-4 P00008 (10:00 ~ 10:20) |
Stochastic Model of Intergranular Stress Corrosion Cracking Based on Crack Initiation, Growth, and Coalescence | |
| Tomoyuki Fujii*, Yuki Takeichi, and Yoshinobu Shimamura (Shizuoka University) | ||
|
Th2A-5 P00020 (10:20 ~ 10:40) |
Effect of Plastic Anisotropy on the Ductile Fracture of Aluminum Extrusions | |
| Seojun Hong, Hyeongseo Kim, and Hyeong-Rim Lee (Seoul National University), Joon Seok Kyeong (Hyundai Mobis), Myoung-Gyu Lee* (Seoul National University) | ||
|
Th2A-6 P00028 (10:40 ~ 11:00) |
Materials Informatics Approach for Improving Tensile Properties of Structural Materials | |
| Takayuki Shiraiwa*, Fabien Briffod, and Manabu Enoki (The University of Tokyo) | ||
|
Th2B - Stress Analysis I/Fatigue II
|
|
|
Th2B-1 P00239 (13:50 ~ 14:10) |
Consideration of Elastic Stress Changes Due to Pipe Shapes in a 90-Degree Curved Pipe System | |
| Sang Hyuk Park, Dong Jun Kim, Jong Sung Kim, and Seok Pyo Hong* (Sejong University) | ||
|
Th2B-2 P00200 (14:10 ~ 14:30) |
A Computational Framework for Evaluating Residual Stress in Multi-Layer Welds of Nuclear Piping with Finite Element and Data-Driven Techniques | |
| Jun-Young Jeon* (KIMS), Kyungsik Ha, Chang-Young Oh, and Sang-Woo Song (Korea Institute of Materials Science (KIMS)), Changsik Oh (Korea Institute of Nuclear Safety) | ||
|
Th2B-3 P00016 (14:30 ~ 14:50) |
Fatigue Behavior of Type 316L Stainless Steel Weld under Cathodic Electrolytic Hydrogen Charging | |
| Yuto Shibayama, Masaki Nakajima, and Yoshihiko Uematsu* (Gifu University) | ||
|
Th2B-4 P00130 (14:50 ~ 15:10) |
Comparative Study of Simplified Elastic-Plastic Evaluation Methodologies for Environmental Fatigue in Stepped Pipe | |
| Tae-Song Han, Hee-Jin Kim, and Nam-Su Huh* (Seoul Nat’l Univ. of Science and Technology), Hyeong-Yeon Lee (Korea Atomic Energy Research Institute) | ||
|
Th2B-5 P00084 (15:10 ~ 15:30) |
Fatigue Limit Diagram under Fixed Maximum Stress Considering Excess Deformation | |
| Miu Hayashi (Hiroshima University), Jinta Arakawa (Okayama University), Yuki Ogawa, Hiroyuki Akebono*, and Atsushi Sugeta (Hiroshima University) | ||
|
Th2C - Stress Analysis II/Fatigue III/Nano/Micro-Systems I
|
|
|
Th2C-1 P00059 (15:50 ~ 16:10) |
Environmentally-Assisted Fatigue of 316 Stainless Steel in Various High Temperature Water Chemistry Environments | |
| Changheui Jang* (KAIST), Hyeon Bae Lee (Korea Advanced Institute of Science and Technology), Taesoon Kim (Central Research Institute, Korea Hydro and Nuclear Power Co. Ltd.) | ||
|
Th2C-2 P00022 (16:10 ~ 16:30) |
Effect of Impurity Chemical Composition on Fatigue Behavior of Al-Mg-Si Casting Alloy | |
| Yuki Ejima, Masaki Nakajima, and Toshifumi Kakiuchi (Gifu University), Tomohiro Suzuki, Takahiro Okazaki, Masato Noguchi, and Tuyoshi Higuchi (Toyota Industries Corporation), Yoshihiko Uematsu* (Gifu University) | ||
|
Th2C-3 P00181 (16:30 ~ 16:50) |
A Study on the Effects of Repair Sequence on Residual Stress Distribution and Deformation for Repair of Metallic Part Using a Directed Energy Deposition Process | |
| Dong Il Jung, Kwang-Kyu Lee, and Dong-Gyu Ahn* (Chosun University) | ||
|
Th2C-4 P00038 (16:50 ~ 17:10) |
Effect of Yield Ratio on the Change in Residual Stresses of Fe-Based Alloys Treated with Fine Particle Peening | |
| Tomofumi Aoki and Jun Komotori* (Keio Univ.) | ||
|
Th2C-5 P00195 (17:10 ~ 17:30) |
Study on Evaluation Method of Dispersion Reliability of Graphene Oxide / Carbon Nanotube / Nano Silica Suspension | |
| Doheon Koo, Sooheon Kim, and Hongyun So* (Hanyang University) | ||
|
Th2C-6 P00027 (17:30 ~ 17:50) |
Effect of Internal Hydrogen on Fatigue-Life Property of Cu-Al-Ni-Fe-Mn Cast Alloy | |
| Ren Yoshimoto* (Fukuoka University), Kojiro Fujiyama and Takafumi Yano (Takatori Seisakusho Co., Ltd.), Hirotoshi Enoki and Takashi Iijima (National Institute of Advanced Industrial Science and Technology), Junichiro Yamabe (Fukuoka University) | ||
|
Th3A - Non-Destructive Testing and Evaluation (NDT&E)
|
|
|
Th3A-1 P00011 (09:00 ~ 09:20) |
Dealing with Redundant Systems at Reliability Demonstration Tests | |
| Tobias Leopold* (Esslingen University of Applied Sciences) | ||
|
Th3A-2 P00243 (09:20 ~ 09:40) |
A Numerical Study on Debonding Monitoring Using Quasistatic Components of Nonlinear Guided Waves | |
| Yongjoon Choi, Mohammed Aslam, and Jaesun Lee* (Changwon National University) | ||
|
Th3A-3 P00101 (09:40 ~ 10:00) |
Measurement Method of Bolt Clamping Force Using Ultrasonic Pulse-Echo System | |
| Lae-Hyong Kang* and HoKwon OH (Jeonbuk National University) | ||
|
Th3A-4 P00023 (10:00 ~ 10:20) |
Effect of Coating and Baking Conditions on Acoustic Properties and Quality of Photoresist Films Investigated by Acoustic Resonant Imaging Technique | |
| Hyelin Kim* and Hironori Tohmyoh (Tohoku University) | ||
|
Th3A-5 P00163 (10:20 ~ 10:40) |
Exploring the Potential of Periodic Structures for Lamb Wave Mode Transformation in Nondestructive Testing | |
| Jiannan Zhang, Younho Cho*, and Young H. Kim (Pusan National University) | ||
|
Th3A-6 P00103 (10:40 ~ 11:00) |
Real-Time Melt Pool Monitoring and Control in Metal DED 3D Printing with IR Thermography | |
| Subin Shin (KAIST), Ikgeun Jeon (Korea Institute of Machinery and Materials (KIMM)), Hoon Sohn* (Korea Advanced Institute of Science and Technology (KAIST)) | ||
|
Th3B - Energy and Plant Engineering/Manufacturing Equipment and Machineries/Electronics/Packaging/Coating/Wear/Tribology
|
|
|
Th3B-1 P00095 (13:50 ~ 14:10) |
AI-Based Temperature Bias Correction System for Electric Vehicle Batteries | |
| Gwanghyeon Mun (Myongji University), Chiwoo Song (Myongji Univ.), Hyun Ahn and Tae Hyoung Kim (Myongji University), jae hyun song (Hongik university), je hoon Jeon (Myongji University), Youngchul Kim (Hanwha Systems), Dongil Choi, Dong-Won Jang*, and Gyu-Jin Lee (Myongji University) | ||
|
Th3B-2 P00186 (14:10 ~ 14:30) |
Reducing Package Design Optimization Time Using Deep Neural Network and Bayesian Optimization | |
| Jungeon Lee and Daeil Kwon* (Sungkyunkwan University) | ||
|
Th3B-3 P00026 (14:30 ~ 14:50) |
Finite Element Modeling of Multi-Scale Friction and Wear in Automotive Brake System | |
| Jung Yun Won (Seoul National University), Youngjae Kim (Hyundai Motors), Tae-Hyun Kim (Seoul National University), Joonseok Kyeong, Hoejeong Jeong, and Kee Yang Lee (Hyundai Mobis), Myoung-Gyu Lee* (Seoul National University) | ||
|
Th3B-4 P00132 (14:50 ~ 15:10) |
Position Synthesis of Planar and Spherical 4R Linkages Based on Improved Telomere Genetic Algorithm | |
| Ya Li, Yajing Jin, and Nana Luo (Shandong Agricultural University), Yehui Zhao (Ocean University of China), Youfeng Zhu (Peking University), Guangming Wang* (Shandong Agricultural University) | ||
|
Th3C - [Mini Symposium] Innovative Material Testing and Applications in Harsh Environments
|
|
|
Th3C-1 P00206 (15:50 ~ 16:10) |
Prediction of Tensile Properties from Indentation Based on Neural Network-Based Model Considering Tip Geometric Imperfection | |
| Jong-hyoung Kim* and Si Hyun Park (Pukyong National University), Jongheon Kim (LG Electronics), Young-Cheon Kim (Andong National University), Seung-Kyun Kang (Seoul National University) | ||
|
Th3C-2 P00161 (16:10 ~ 16:30) |
Hybrid Machine Learning Model Using HHO Algorithm for Predicting the Onset of Void Swelling in Irradiated Metals | |
| Van-Thanh Pham, Kyoon-Ho Cha, and Jong-Sung Kim* (Sejong University) | ||
|
Th3C-3 P00228 (16:30 ~ 16:50) |
Prediction of Fracture Behavior in Hydrogen Transportation Pipes Using Small Punch Tests | |
| Jae-heon Jung (Pukyong National University), Ki-Wan Seo (Korea University), Jin-ha Hwang* (Pukyong National University) | ||
|
Th3C-4 P00201 (16:50 ~ 17:10) |
Fracture Mechanics Analysis of the Effect of Pre-strain on Hydrogen Pipelines | |
| Ki-Wan Seo, Hee-Jin Jeong, Jae-Yoon Kim, and Yun-Jae Kim* (Korea University), Ki-Seok Kim (POSCO) | ||
|
Th3C-5 P00085 (17:10 ~ 17:30) |
Development and Confirmation of Thermal Fatigue Testing System | |
| Su Yeong Lee (Chosun University), Jin Weon Kim* (Chosun Univercity), Tae Soon Kim and Hyun Suk Nam (Korea Hydro & Nuclear Power Co.) | ||
|
Th3C-6 P00271 (17:30 ~ 17:50) |
Instrumented Indentation Testing: A Tool for On-site Reliability Assessment of In-service Materials | |
| J. H. Hong (FRONTICS, Inc.), D. I. Kwon* (Seoul National University) | ||
|
Th4A - Advanced Materials II
|
|
|
Th4A-1 P00143 (09:00 ~ 09:20) |
Ultrasonic and Thermal Exfoliation for Molybdenum Disulfide Quantum Dots | |
| Hon Pan Yiu, Cheng Jun Wu, William Li, and Chuan Li* (National Yang Ming Chiao Tung University), Cho Yin Lee (Taoyuan General Hospital) | ||
|
Th4A-2 P00093 (09:20 ~ 09:40) |
Mechanical Control of Ferroelectric Polarization in Two-Dimensional α-In2Se3 | |
| Yang Zhang*, Seita Katayama, Wataru Matsunaga, and Hiroyuki Hirakata (Kyoto University) | ||
|
Th4A-3 P00081 (09:40 ~ 10:00) |
Glycerogel-Based All-Gel Stretchable Supercapacitor with Wide Temperature Tolerance | |
| Adith Varma Rama Varma (Chonnam National University), INSU JEON* (CHONNAM NATIONAL UNIVERSITY, GWANGJU) | ||
|
Th4B - [Mini Symposium] Advanced SHM and NDE Techniques
|
|
|
Th4B-1 P00062 (13:50 ~ 14:10) |
Optimization of Exciting Frequency and Lamb Wave Mode for Detecting Wall-Thinning in Plates Using Scanning Laser Doppler Vibrometer | |
| Minho Yoon* (University of Seoul), Hyun-Seok Kim (Korea Research Institute of Ships & Ocean Engineering), To Kang (Korea Atomic Energy Research Institute) | ||
|
Th4B-2 P00065 (14:10 ~ 14:30) |
A Study on Vibration Characteristics of Transparent OLED Using Finite Element Method | |
| Bong-Ju Kim and Yun-Taek Yeom* (Dongyang University) | ||
|
Th4B-3 P00061 (14:30 ~ 14:50) |
Investigating Metamaterials for Eliminating Higher Harmonics in Nonlinear NDT | |
| Boris I, Mohammed Aslam, and Jaesun Lee* (Changwon National University) | ||
|
Th4B-4 P00055 (14:50 ~ 15:10) |
Laser Induced Phased Array Ultrasound for Inspection of Nuclear Power Plant Components | |
| To Kang* (KAERI), Soonwoo Han and Sung-Woo Kim (Korea Atomic Energy Research Institute) | ||
|
Th5A - Soft & Bio-Materials/Others
|
|
|
Th5A-1 P00043 (09:00 ~ 09:20) |
Engineering Mechanical Heart Valves: An Overview of Components, Manufacturing Materials, and Clinical Challenges | |
| Sai Kireeti (Manipal Institute of technology), Nitesh Kumar* (Manipal Institute of Technology) | ||
|
Th5A-2 P00214 (09:20 ~ 09:40) |
Physical and Chemical Properties Evaluation of PEFB and Bamboo Fibre as Bio-Based Insulation Materials | |
| Zamil Hisham Abdul Rashid and Abdul Murad Zainal Abidin (JKR Centre of Excellence for Engineering and Technology (CREaTE)), NIK NORMUNIRA MAT HASSAN*, Noraini Marsi, and Abdul Mutalib Leman (UNIVERSITI TUN HUSSEIN ONN MALAYSIA), Mohamad Fikri Mohamad Yunus and Tengku Muhammad Ibrahim SALAHUDDIN (JKR Centre of Excellence for Engineering and Technology (CREaTE)), Tasnim Zakepeli (UNIVERSITI TUN HUSSEIN ONN MALAYSIA) | ||
|
Th5A-3 P00015 (09:40 ~ 10:00) |
Fatigue Crack Growth Behavior of Carbon Black and Silica Filled SBRs with Varying Filler Contents | |
| Ryota Yamamoto* and Syota Irie (Fukuoka University), Naruto Maeda (Yokohama Rubber Co., Ltd.), Masaki Fujikawa (University of the Ryukyus), Takashi Kakubo, Naoya Amino, and Masataka Koishi (Yokohama Rubber Co., Ltd.), Junichiro Yamabe (Fukuoka University) | ||
|
Th5A-4 P00154 (10:00 ~ 10:20) |
Comparison of the Effectiveness of Precipitation Parameters Using H2SO4 and HCl in Silica Extraction from Coal Fly Ash Using the Sequential Acid-Alkaline Leaching (SAAL) | |
| Nikita Indira Kusuma, Muhammad Akmal Fahriza, and Reza Miftahul Ulum* (University of Indonesia) | ||
|
Th5B - [Mini Symposium] Safety and Survivability Solution via AI-IoT based Biometric Signal Analysis
|
|
|
Th5B-1 P00092 (13:50 ~ 14:10) |
Predictive Analysis of Sharp Impact on Multi-Layered Fiber and Soft Laminated Structures | |
| SHIVASHANKAR HIREMATH (Hanyang University Seoul), Xianqun Gong, Taekkyun Kim, Myeongkyun Ko, and Tae-Won Kim* (Hanyang University, Seoul) | ||
|
Th5B-2 P00090 (14:10 ~ 14:30) |
Implications of Flexible Materials under Varied Extrusion Conditions and Performance Prediction Using a Machine Learning Approach | |
| Myeongkyun Ko, Shivashankar Hiremath, Taekkyun Kim, Xianqun Gong, and Tae-won Kim* (Hanyang University) | ||
|
Th5B-3 P00088 (14:30 ~ 14:50) |
Analysis of Impact Signal Based on PVDF Composite Sensor | |
| Taek Kyun Kim, Shivashankar Hiremath, Myeong kyun Ko, Xianqun Gong, and Tae Won Kim* (Hanyang University) | ||
|
Th5B-4 P00034 (14:50 ~ 15:10) |
Prediction of Impactor Shape by Machine Learning with Voltage Drop Characteristics of Carbon-Kevlar Hybrid Fabrics | |
| T.H. Kim (Hanyang University), T.W. Kim* (Hanyang Univ.) | ||
|
Th5C - [Mini Symposium] PHM-driven Smart Durability Testing for Annoying Noise in Automotive Industry
|
|
|
Th5C-1 P00248 (15:50 ~ 16:10) |
Subtle Impulsive Noise Detection by Vibration Sensor in Automotive Power Door System: Kurtosis-Based Identification and Continuous Wavelet Transformation for Severity Assessment | |
| Jinwoo Song and Junggyu Choi (Korea Aerospace University), Seok Hyun Hong and Yun Jong Lee (Hyundai·Kia Motors R&D Center), Hae-Sung Yoon and Joo-Ho Choi* (Korea Aerospace University) | ||
|
Th5C-2 P00247 (16:10 ~ 16:30) |
Vibration-Based Diagnosis Method for Grinding Noise Detection in Automotive Power Door System | |
| Jeongmin Shin and Jinwoo Song (Korea Aerospace University), Seok Hyun Hong and Yun Jong Lee (Hyundai·Kia Motors R&D Center), Hae-Sung Yoon and Joo-Ho Choi* (Korea Aerospace University) | ||
|
Th5C-3 P00246 (16:30 ~ 16:50) |
Exploiting Sound Quality Metrics in Squeak Noise Detection in Automotive Power Window System | |
| Seungyoon Oh and Jinwoo Song (Korea Aerospace University), Seok Hyun Hong and Yun Jong Lee (Hyundai·Kia Motors R&D Center), Hae-Sung Yoon and Joo-Ho Choi* (Korea Aerospace University) | ||
|
Th6A - [Mini Symposium] Innovations in Performance and Reliability for Energy-Intensive Applications
|
|
|
Th6A-1 P00259 (09:00 ~ 09:15) |
Fouling Management for Industrial Waste Heat Recovery | |
| Kyoungmin Koo* (KOTMI) | ||
|
Th6A-2 P00258 (09:15 ~ 09:30) |
Review on a MVR (Mechnial Vapor Re-Compression) Applications for a Vapor Generation in Industrial Processes | |
| Jeongsik Seo* (KRAAC), M. J. Kim and H. N. Kim (KRAAC (Korea Refrigeration and Air-condition Assessment Center)) | ||
|
Th6A-3 P00249 (09:30 ~ 09:45) |
Enhancing Operational Performance and Reliability of Vertical Multistage Pumps for Water Supply Booster Stations | |
| Sang Hyuk Lee* (KIMM), Kyung Ho Sun (Korea Institute of Machinery & Materials), Jongrak Choi and Joo Han Kim (Korea Electronics Technology Institute), In-Sik Yoon (Dooch Co., Ltd.) | ||
|
Th6A-4 P00209 (09:45 ~ 10:00) |
Design of High Efficiency Transformer Considering Non-linear Material Property | |
| Myung-Hwan Yoon* (KETI), Jae-Kwang Lee, Jeong-Jong Lee, and Ki-Doek Lee (KETI (Korea Electronics Technology Institute)) | ||
|
Th6A-5 P00162 (10:00 ~ 10:15) |
High-Precision Shaft Vibration Measurement System for Reliable of Anomaly Detection in Companders of Air Refrigerant Cooling System | |
| Gyunchul Hur* (KIMM), Sang Hyuk Lee (Korea Institute of Machinery and Materials), Hyungki Shin and Jongjae Cho (Korea Institute of Energy Research) | ||
|
Th6A-6 P00225 (10:15 ~ 10:30) |
Overall Ice Maker Performance Analysis Experiment through Condensation Temperature Drop for Increase COP and Drop-In Test Using Low-GWP(R-454C) Refrigerant | |
| Juneseok Oh, Junseok Kim, Jongsoo Kim, and Yongseok Jeon* (Ajou University) | ||
|
Th6A-7 P00220 (10:30 ~ 10:45) |
Design and Thermal Comfort Analysis of a Radiant Cooling System for Vehicles | |
| Suet Man Wong* and Dongchan Lee (University of Seoul) | ||
|
Th6A-8 P00218 (10:45 ~ 11:00) |
Development of Low-Noise Toroidal Propeller Design Technology for an Air Vehicle | |
| Juwook Lee and Jongrak Choi* (Korea Electronics Technology Institute) | ||
|
Th6B - [Mini Symposium] Advanced Materials based Energy Devices
|
|
|
Th6B-1 P00058 (13:50 ~ 14:10) |
Parametric Study on Synthesis of Paraffin Microsheet for Latent Heat Storage | |
| Jongseok Son, Somin Kim, and Byeongnam Jo* (Ajou University) | ||
|
Th6B-2 P00086 (14:10 ~ 14:30) |
Tribological Properties of Lubricant-Based Self-Powered TENG | |
| Jongsuk Lee, Seh-Hoon Chung, Sangmin Lee, and Sunghan Kim* (Chung-Ang University) | ||
|
Th6B-3 P00056 (14:30 ~ 14:50) |
Thermal Reliability of Microencapsulated Nitrate Salts for Thermal Energy Storage: Effects of Surfactant | |
| Yun Hwan Ji and Byeongnam Jo* (Ajou University) | ||
|
Th6B-4 P00064 (14:50 ~ 15:10) |
Multifunctional Wearable Sensors Responded to Humidity | |
| Chanui Lee and Sunghan Kim* (Chung-Ang University) | ||
|
Th6B-5 P00060 (15:10 ~ 15:30) |
Wearable Pressure Sensor with Adjustable Sensitivity Self-Powered by Bio-Electrolytes | |
| Hyeonho Cho and Sunghan Kim* (Chung-Ang University) | ||
|
Th6C - Reliability Analysis and Modeling
|
|
|
Th6C-1 P00029 (15:50 ~ 16:10) |
Confidence-Based Data-Driven Computing in Elasticity by Using Segmented Least Squares and Mixed-Integer Programming | |
| Yoshihiro Kanno* (The University of Tokyo) | ||
|
Th6C-2 P00048 (16:10 ~ 16:30) |
Reliability Evaluation and Optimal Design of Hydraulic Excavator Working Device Using Integrated Optimal Machine Learning Algorithm | |
| Yuxin Liu, Yuan Lu, Tudi Huang, Zhe Deng, and Hongzhong Huang* (University of Electronic Science and Technology of China) | ||
|
Th6C-3 P00148 (16:30 ~ 16:50) |
SIP-Oriented Reliability Analysis of the Main Drive System of a CNC Machine Tool | |
| He Li* (Liverpool John Moores University), Carlos Guedes Soares (University of Lisbon), Jin Wang (Liverpool John Morres University) | ||
|
Th6C-4 P00047 (16:50 ~ 17:10) |
Reliability Analysis of Wear Degradation of Drive Mechanism Bearing | |
| Zhiming Deng, Zixing Huang, Yu-Xin Liu, Yan-Feng Li, and Hong-Zhong Huang* (University of Electronic Science and Technology of China) | ||
|
Th6C-5 P00045 (17:10 ~ 17:30) |
Estimation of Stress-Strain Curves for Carbon Fiber Bundle Considering Friction Stress by Markov Process | |
| Shinya Matsuda* (Kagawa University), Koichi Goda (Yamaguchi university) | ||
|
Th6C-6 P00044 (17:30 ~ 17:50) |
Reliability Analysis of Peristaltic Pump Hose Based on Multiple Response Gaussian Process | |
| Hua-Ming Qian*, Yan-Feng Li, Zi-Wei Xu, and Hong-Zhong Huang (University of Electronic Science and Technology of China) | ||
|
Fr1A - Plenary Lectures 7, 8
|
|
|
Fr1A-1 P00266 (09:00 ~ 09:40) |
[Plenary Lecture 7] Digital Twin-Driven Health Management and Remaining Useful Life Prediction of the Gearbox Transmission System | |
| Ke Feng* (Xi’an Jiaotong University) | ||
|
Fr1A-2 P00269 (09:40 ~ 10:20) |
[Plenary Lecture 8] Physics-informed Neural Operators Networks and Generative AI To Solve Mechanical Engineering Problems | |
| Seungchul Lee* (Korea Advanced Institute of Science and Technology) | ||
|
Fr2A - Nano/Micro-Systems II
|
|
|
Fr2A-1 P00019 (09:00 ~ 09:20) |
Fabrication of Oxide-Semiconductor Nanowires with P-N Junctions by Stress-Induced Migration for Solution Sensor Applications | |
| Yoshinari Kimura* and Hironori Tohmyoh (Tohoku University) | ||
|
Fr2A-2 P00235 (09:20 ~ 09:40) |
Flexible Piezoresistive Pressure Sensor with Gradient Pore Density Sponge Structure Using FDM-type 3D-Printing Technology | |
| Byungkwon Chun, Junyoung Park, Joohyung Bang, and Hongyun So* (Hanyang University) | ||
|
Fr2A-3 P00054 (09:40 ~ 10:00) |
Design of Starch-Based Triboelectric Nanogenerators: Towards Reliable Power Generation for Integrated Wearable IoT | |
| Bincy Thanjan Shaji and Sang Jae Kim* (Jeju National University) | ||
|
Fr2A-4 P00032 (10:00 ~ 10:20) |
Incredible Tolerance to Fatigue Damage Exhibited by 10 nm-Class Gold Single Crystal | |
| Masahiro Kato* (Kyoto University), Kota Sugisaka, Yamato Ishizaka, Masataka Abe, and Takashi Sumigawa (Kyoto university) | ||
|
Fr2A-5 P00146 (10:20 ~ 10:40) |
Simulation of the Zr Hydride Microstructural Evolution Reflecting the Effects of Grain Texture and Grain Boundaries: A Phase-Field Approach | |
| Wooseob Shin and Kunok Chang* (Kyung Hee University) | ||
|
Fr2A-6 P00017 (10:40 ~ 11:00) |
Domain Switching of Submicron-Sized BaTiO3 Single Crystal by Bending Deformation | |
| Kota Sugisaka* (Kyoto University), Shotaro Ikemoto, Ken Hikasa, Masataka Abe, and Takashi Sumigawa (Kyoto university) | ||
|
Fr2A-7 P00160 (11:00 ~ 11:20) |
Superhydrophobic Sponge Sensor for Water-Level Detection based Underwater Vibration and Inclination Monitoring | |
| Joohyung Bang and Hongyun So* (Hanyang University) | ||
|
Fr2A-8 P00147 (11:20 ~ 11:40) |
Effect of Nonlinear Elasticity on Microstructure Evolution Behavior using Phase-field Model | |
| Jeonghwan Lee and Kunok Chang* (Kyung Hee University) | ||
|
Fr3A - Degradation Modeling/Condition-based and Predictive Maintenance/Deep Learning Methods and Applications/PHM for Smart Factory
|
|
|
Fr3A-1 P00050 (09:00 ~ 09:20) |
Degradation Modeling and Remaining Useful Life Prediction Method for Operational Amplifiers Using GA-Optimized SVR | |
| Xin Huang (University of Electronic Science and Technology of China), Hao Niu (No.5 Electronics Research Institute of Ministry of Industry and Information Technology (MIIT), Guang), Ying Zeng, Jing Li, and Hong-Zhong Huang* (University of Electronic Science and Technology of China) | ||
|
Fr3A-2 P00036 (09:20 ~ 09:40) |
Development of an Intelligent Integrity Monitoring System ‘HITEP-WIMS’ for High-Temperature Pressure Boundary Components and Piping | |
| Hyeong-Yeon Lee*, Ki-Ean Nam, Yun-Seong Lee, and Jahyuk Eoh (KAERI) | ||
|
Fr3A-3 P00197 (09:40 ~ 10:00) |
Development of Axle Bearing Temperature Monitoring System for Railway Vehicles | |
| Jeongguk Kim* (KRRI), Sungil Seo (Korea Railroad Research Institute) | ||
|
Fr3A-4 P00211 (10:00 ~ 10:20) |
An End-to-End Swin Transformer Model for Virtual Health Indicator-Based Remaining Useful Life Prediction of Rolling Bearings | |
| Sungeu Chae, Dayeon Jeong, Ki-Yong Oh, and Suk Joo Bae* (Hanyang University) | ||
|
Fr3A-5 P00105 (10:20 ~ 10:40) |
Development of the Methodology for Optimal Classification of 22 Types of GI Sheets based on Eddy Current Testing | |
| Ki-Han Lee, Changhyeon Kim, Young-Dae Shim, and Jihun Kim (Sungkyunkwan Univ.), Hyunwoo So, In Wan Choi, Ji Yong Jeong, and Junyong Park (LG Electronics Inc.), Eun-Ho Lee* (Sungkyunkwan Univ.) | ||
|
Fr3A-6 P00216 (10:40 ~ 11:00) |
Lamb Wave-Based Data-Driven Approach for Damage Severity and Zone Identification in Composite Structures Using Graph Convolutional Network | |
| Muhammad Muzammil Azad and Jaehyun Jung (Dongguk University), Olivier Munyaneza and Jung Woo Sohn (Kumoh National Institute of Technology), Heung Soo Kim* (Dongguk University) | ||
|
Fr3A-7 P00136 (11:00 ~ 11:20) |
Analysis and Intelligent Diagnosis of Power-Shift System Faults for Agricultural HMT Tractors | |
| Kejia Zhai, Guozhao Liu, Ziyu Song, Xiangzhi Chen, Guangming Wang, and Honghua Jiang* (Shandong Agricultural University) | ||
|
Fr4A - Metals/Alloys/Composites
|
|
|
Fr4A-1 P00122 (09:00 ~ 09:20) |
A Comparative Study of Direct and Alternating Current on the Microstructure Evolution of Additively Manufactured Ti-6Al-4V | |
| Chang Liu, Shaojie Gu, Xinming Yan, and Yasuhiro Kimura (Nagoya University), Yang Ju (Zhejiang University), Yuhki Toku* (Nagoya University) | ||
|
Fr4A-2 P00188 (09:20 ~ 09:40) |
Effect of Substrate and Deposition Conditions on the Corrosion Behavior of Sputtered Ti Thin Films | |
| Haechan Jo and Hyorin Moon (Sungkyunkwan University), Jeongsoo Kim (Hyundai Motor Company), Dongwoo Lee* (Sungkyunkwan University) | ||
|
Fr4A-3 P00180 (09:40 ~ 10:00) |
The Yield Point Phenomenon Induced by Cottrell Atmosphere Formation in Aluminum-Carbon Thin Film | |
| Zion Lee, Hojang Kim, Sunkun Choi, Injong Oh, and Gi-Dong Sim* (KAIST) | ||
|
Fr4A-4 P00030 (10:00 ~ 10:20) |
Hydrogen Diffusivity and Its Mechanism of Additively Manufactured 17-4 PH Steels with Different Densities | |
| Mina Arakaki*, Soma Kato, and Junichiro Yamabe (Fukuoka University) | ||
|
Fr4A-5 P00066 (10:20 ~ 10:40) |
The Impact of Post Weld Quenched and Tempered Process on the Mechanical Properties of Electron Beam Welded SA508 Gr.3 Cl.1 | |
| Ye Jin Kweon* (KAIST), Taejeong An, Hongdeok Kim, and Changheui Jang (KAIST university) | ||
|
Fr4A-6 P00009 (10:40 ~ 11:00) |
Fabrication of Porous Titanium-Zirconium Alloy by Space Holder Technique and Its Mechanical Properties | |
| Seok-june Seo*, Tomoyuki Fujii, and Yoshinobu Shimamura (Shizuoka University) | ||
|
Fr4A-7 P00227 (11:00 ~ 11:20) |
Prediction of Mechanical Properties for Degraded A471 Steel from Instrumented Indentation Using a Deep Learning Algorithm | |
| Seongwoo Jang and Wonjun Shin (Jeonbuk National University), Sangho Kim (KEPCO research Institute), Jihoon Han* (Jeonbuk National University) | ||
|
Fr4A-8 P00155 (11:20 ~ 11:40) |
Superior Wear Performance of CoCrNi Matrix Composite Reinforced with Quasi-Continuously Networked Graphene Nanosheets and In-Situ Carbide | |
| Wenting Ye* (Northwestern Polytechnical University) | ||
|
Fr5A - Accelerated Life Testing and Analysis/
Software Reliability and Testing/ Reliability-based Optimization and Control Reliability Theory/Others |
|
|
Fr5A-1 P00255 (09:00 ~ 09:20) |
Evaluation of Accelerated Degradation Test of Gas Turbine Rotor Material | |
| Doohyeong Kim (Myongji University), Min-Kyu Park (KEPCO Research Institute), Seungbin Kim and Yongseok Lee* (Myongji University) | ||
|
Fr5A-2 P00097 (09:20 ~ 09:40) |
Non-Destructive Monitoring of Mechanical Degradation of Nanostructured Carbon-Based Films under Freeze-Thaw Cycles by S-Parameter Analysis | |
| Yong Hwi Kim (KAIST), Tae Yeob Kang (The University of Suwon), Taek-Soo Kim* (KAIST) | ||
|
Fr5A-3 P00144 (09:40 ~ 10:00) |
Visual Cognitive Characteristics in the Task of Searching for Evacuation Signs in Virtual Space | |
| Tetsuya Miyoshi* (Hannan University) | ||
|
Fr5A-4 P00194 (10:00 ~ 10:20) |
Development of a Web-Based Design Integrity and Environmental Fatigue Evaluation Program ‘HITEP_ASME-NB' for Nuclear Class 1 Pressure Boundary Components | |
| Yun-Seung Lee* (Gyeongsang National University), Hyeong-Yeon Lee, Ki-Ean Nam, and Jahyuk Eoh (Korea Atomic Energy Research Institute (KAERI)), Sung-Ki Lyu (Gyeongsang National University) | ||
|
Fr5A-5 P00067 (10:20 ~ 10:40) |
Study on Time Characteristics of Process Instruments for Periodic Tests in Nuclear Power Plants | |
| si Cui* (China Productivity Center for Machinery Co.,Ltd.), Jia Qing Chen (CNNC Nuclear Power Operation Management Co., LTD.), Kun Tan (China Productivity Center for Machinery Co.,Ltd.) | ||
|
We7R - Poster Session 1
|
|
|
We7R-1 P00007 (11:20 ~ 12:20) |
Effects of Vibration and Temperature on Bolt Loosening for Al Profile | |
| Masaki Watanabe* and Shinya Matsuda (Kagawa University) | ||
|
We7R-2 P00012 (11:20 ~ 12:20) |
Limit Load Analysis of Through-Wall Cracks under Bending Load in Elbow-Pipe Junctions Considering Small and Large Strain Effects | |
| Jihye Kim, Hyewon Jeong, and Yunjae Kim* (Korea Univ.) | ||
|
We7R-3 P00031 (11:20 ~ 12:20) |
Determination of Negligible Creep Curve by Creep Life Prediction of P92 Steel | |
| Woo-Gon Kim* (KETG), Youngjin Roh and Seonhwa Kim (Korea Energy Technology Group (KETG)), Ki-Ean Nam and Hyeong-Yeon Lee (Korea Atomic Energy Research Institute (KAERI)), Seon-Jin Kim (Pukyong National University) | ||
|
We7R-4 P00057 (11:20 ~ 12:20) |
Analytical Study of Fatigue Life under Overload of Structural Members with Different Crack Aspect Ratio | |
| Ji-Min Yun (Pukyong Nat’l Univ.), Seok-Hee Kang* (Iljin Steel Co., Ltd), Ki-Woo Nam (Pukyong Nat’l Univ) | ||
|
We7R-5 P00111 (11:20 ~ 12:20) |
A Study on Thermal Runaway Propagation Prevention Simulation for Electric Vehicle Lithium-ion Battery Module and an AI-Based Prediction Model | |
| Hyo Jung Choi* (Pusan National University), Bo Sung Shin (university) | ||
|
We7R-6 P00075 (11:20 ~ 12:20) |
Robot Manipulator Analysis in External Wind Condition | |
| Jong Ho Choi* (Inha University), Seung Bum Park (ACEWORKS) | ||
|
We7R-7 P00080 (11:20 ~ 12:20) |
A Preliminary Study on Expandable Graphite Films and Molecular Dynamics Simulation for Enhancing Thermal Safety in EV Batteries | |
| Sua Kim* (Pusan National University), Bosung Shin (Pusan University) | ||
|
We7R-8 P00083 (11:20 ~ 12:20) |
Improving Stability and Performance of Perovskite Solar Cells through Bilayer Structure Using Ruddlesden-Popper Phase | |
| Won-Gyu Choi and Jae-Seong Jeong* (Korea Electronics Technology Institute) | ||
|
We7R-9 P00099 (11:20 ~ 12:20) |
Elastic-Plastic Fracture Mechanics Analysis of API X80 Hydrogen Pipe | |
| Heejin Jeong (Korea University), kiwan Seo, jaeyoon Kim, and yunjae Kim* (Korea university), kiseok Kim (POSCO, Global R&D Center) | ||
|
We7R-10 P00135 (11:20 ~ 12:20) |
Effect of Lithium Addition on Three-Point Bending Deformation Behavior of Magnesium Single Crystals | |
| Kanta Nojiri, Hiromoto Kitahara, and Shinji Ando* (Kumamoto University) | ||
|
We7R-11 P00113 (11:20 ~ 12:20) |
Creep-rupture Test and FEM Simulation for Quality Assessment of Solder Joints Using New Creep-rupture Tester | |
| Jae-Seong Jeong* (KETI), Young-Gi An (Korea Electronics Technology Institute (KETI)) | ||
|
We7R-12 P00118 (11:20 ~ 12:20) |
Predicting IGBT Lifetime on Outdoor Air Conditioning Unit Controller Boards Using Realistic Load Profiles | |
| Juhwan Kim and Changwoon Han* (SUNY Korea) | ||
|
We7R-13 P00129 (11:20 ~ 12:20) |
Effects of Grain Size and Oxygen on Slip Activity in Rolled Pure Titanium | |
| Takuma Hirooka, Hiromoto Kitahara, and Shinji Ando* (Kumamoto University) | ||
|
We7R-14 P00134 (11:20 ~ 12:20) |
Fracture Prediction of Polybutylene Terephthalate (PBT) based on Stress Triaxiality | |
| Tomoki Yomatsu* and Masaki Omiya (Keio University), Kazunari Kusaka and Natsuhiro Mita (IRISO ELECTRONICS Co.,Ltd.) | ||
|
We7R-15 P00158 (11:20 ~ 12:20) |
Digital Light Processing of Electrically Conductive CNT Nanocomposites | |
| Jiwan Kang, Soonjae Pyo, and Keun Park* (Seoul National University of Science and Technology) | ||
|
We7R-16 P00070 (11:20 ~ 12:20) |
Research on Real-Time Reliability Assessment of Lithium-Ion Batteries Based on Performance Degradation | |
| Xiong Shu and Wei Ke Xiang* (Hunan Institute of Engineering) | ||
|
We7R-17 P00140 (11:20 ~ 12:20) |
Effects of Multimodal Microstructure on Fatigue Fracture of Extruded Magnesium Alloys | |
| Fuga Miyazaki, Hiromoto Kitahara, and Shinji Ando* (Kumamoto University) | ||
|
We7R-18 P00142 (11:20 ~ 12:20) |
Reliability Analysis of RV Reducer in Vibration Transfer Path based on Stiffness Degradation | |
| Xingang Wang* (Guangdong University of Petrochemical Technology), Kui Zhang (Liaoning Petrochemical University), Wangbao Yan and Junhao Zhang (Guangdong University of Petrochemical Technology) | ||
|
We7R-19 P00151 (11:20 ~ 12:20) |
Temperature Dependence on Grain Size of CoCrCuFeNi High Entropy Alloy: Molecular Dynamics Simulation | |
| Sungmin Yoon* (Changwon National University) | ||
|
We7R-20 P00178 (11:20 ~ 12:20) |
Characterizing the Mechanical Properties of Thin Films Using FEA-Assisted Membrane Deflection Experiments | |
| Hojang Kim (KAIST), Jae-Hoon Choi (Jeonbuk National University), Jung Hun Park, Zhuo Feng Lee, and Gi-Dong Sim* (KAIST) | ||
|
We7R-21 P00166 (11:20 ~ 12:20) |
Safety Study of Buried Gas Pipelines under Excavation Loads | |
| Yuan-jian Yang*, You-jian Gu, Yong-long Tang, Su-Tong Lv, and Jun-Jie He (School of Safety Engineering, Chongqing University of Science and Technology) | ||
|
We7R-22 P00169 (11:20 ~ 12:20) |
Preliminary Evaluation of Residual Stress Depth Profiles of Laser-Peened Stainless Steels by EBSD Data Analysis | |
| Hiroki Iwamoto*, Yuan Zhang, and Masatoshi Kuroda (Kumamoto University), Noriaki Hirota (Japan Atomic Energy Agency), Yuji Kobayashi and Yuta Kimura (Shintokogio, Ltd) | ||
|
We7R-23 P00170 (11:20 ~ 12:20) |
Stress Intensity Factor Solution for Surface Flaws in the Junction between a Straight Pipe and an Elbow under Bending Load | |
| Hyungbin Jin and NAMSU HUH* (Seoul National University of Science and Technology) | ||
|
We7R-24 P00191 (11:20 ~ 12:20) |
Combinatorial Approaches to Improve Ignition Resistance in Nickel-Based Materials | |
| Ajin Jo, Chan Kim, and Dongwoo Lee* (Sungkyunkwan University) | ||
|
We7R-25 P00199 (11:20 ~ 12:20) |
Fracture Mechanics Evaluation of CISCC in Spent Nuclear Fuel Dry Storage Under Combined Stress with Consideration Residual Stress | |
| Jihye Kim and Yunjae Kim* (Korea University) | ||
|
We7R-26 P00179 (11:20 ~ 12:20) |
Triaxiality-Dependent Compressive Damage in Cyclic Void Growth Shrinkage Model | |
| Ma Xinyu and Yun-Jae Kim* (Korea University), Jin-Weon Kim (Chosun University) | ||
|
We7R-27 P00187 (11:20 ~ 12:20) |
Low-Cost MEMS-Based Recoil Analysis through Riflescopes: Instrumentation and Data Acquisition | |
| Jose Simoes*, Eurico Seabra, and Nuno Dourado (University of Minho) | ||
|
We7R-28 P00190 (11:20 ~ 12:20) |
Combinatorial Study on Corrosion Behavior of Ti-Zr Thin Film Alloys | |
| Hyorin Moon and Haechan Jo (Sungkyunkwan University), Jeongsoo Kim (Hyundai Motor Company), Dongwoo Lee* (Sungkyunkwan University) | ||
|
We7R-29 P00212 (11:20 ~ 12:20) |
Structural Design and Study of the Main Component Layer in the Structural Energy Storage Composites | |
| Jei Gyeong Jeon (KIST), Tae June Kang (Inha University), Minkook Kim and Min Wook Lee* (Korea Institute of Science and Technology) | ||
|
We7R-30 P00215 (11:20 ~ 12:20) |
A Simple Method for Evaluation of Elastic Modulus via Multiple Indentation Tests | |
| Yeongmin Yoon, Giyeol Han, and Hyungyil Lee* (Sogang University) | ||
|
We7R-31 P00202 (11:20 ~ 12:20) |
Reproducibility of Surface Characteristics of Laser-Peened Stainless Steels by Response Surface Modelling | |
| Tzu-Fan Hsu, Rio Otomo, Yuan Zhang, and Masatoshi Kuroda* (Kumamoto University), Yuji Kobayashi and Yuta Kimura (Shintokogio, Ltd.) | ||
|
We7R-32 P00207 (11:20 ~ 12:20) |
Feasibility Study of the Application of Aluminium as an Inductor of a Solenoid Valve | |
| Gabriel Alves and Eurico Seabra* (University of Minho) | ||
|
We7R-33 P00210 (11:20 ~ 12:20) |
Analysis and Optimization of a Functional Test Bench for Automotive Electric Motors | |
| Ivo Ferreira and Eurico Seabra* (University of Minho) | ||
|
We7R-34 P00231 (11:20 ~ 12:20) |
Laser Induced Pore Formation in Polyethylene (PE) Film Containing Azodicarbonamide (ADCA) | |
| Chae Yoon Shin and Bo-Sung Shin* (Pusan National University) | ||
|
We7R-35 P00238 (11:20 ~ 12:20) |
Effect of Crystallographic Texture on the Creep Behavior of Additively Manufactured 316L Stainless Steel | |
| Kwang-Hyeok Lim and Jongsoo Bae (KAIST), Shubham Chandra (Nanyang Technological University), Xipeng Tan (National University of Singapore), Gyumin Lee and Gi-Dong Sim* (KAIST) | ||
|
We7R-36 P00224 (11:20 ~ 12:20) |
Numerical Simulation of Fracture Behavior in Welded Plates With Multiple Through-walled-Cracks | |
| Beom-Jin Kim (Pukyong National University), Chang-Young Oh (Korea Institute of Materials Science (KIMS)), Jin-Ha Hwang* (Pukyong National Univeristy) | ||
|
We7R-37 P00229 (11:20 ~ 12:20) |
Spline Fatigue Prediction Method Based on Digital Twin | |
| Yingxuan Chen (Northwestern Polytechnical University), Tianxiang Yu* (National Key Laboratory of Aircraft Configuration Design) | ||
|
We7R-38 P00230 (11:20 ~ 12:20) |
Lifetime Analysis for Photocouplers Using Accelerated Life Test | |
| Yonghun Park, Intae Kim, and Sangchul Park (Ajou University), Junghwan Kim and Changhwoi Kim (Korea Atomic Energy Research Institute), Joonha Jung* (Ajou University) | ||
|
We7R-39 P00250 (11:20 ~ 12:20) |
Simulation Analysis of Stress Distribution in Wear-Resistant Conductive Coatings Under Fluid-Solid Coupling | |
| Luping Gao, Xin Huo, and Tianxiang Yu* (Northwestern Polytechnical University) | ||
|
We7R-40 P00240 (11:20 ~ 12:20) |
Microstructural Formation of Several Binary Aluminum Alloys During a Unidirectional Solidification Process | |
| Shuhei Takeuchi and Mitsuhiro Okayasu* (Okayama University) | ||
|
We7R-41 P00241 (11:20 ~ 12:20) |
Simulation of Drop Accidents During Storage of Containers in Deep Geological Disposal Facilities for Radioactive Waste | |
| SeokWoo Kim, JaeAn Lee, and JongSung Kim* (Sejong University) | ||
|
We7R-42 P00244 (11:20 ~ 12:20) |
Design and Study of Magnetite, MXene and Activated Carbon Based Nanocomposites for Enhanced Lead Ion Removal from Water Solutions | |
| Aigerim Imash* and Gaukhar Smagulova (Satbayev University), Aruzhan Keneshbekova (Institute of Combustion Problem, 4International Chinese-Belorussian Scientiffc Laboratory on Vacuum), Bayan Kaidar and Aidos Lesbayev (Satbayev University) | ||
|
Th7R - Poster Session 2
|
|
|
Th7R-1 P00006 (11:00 ~ 12:00) |
Preliminary Study for Optimum Maintenance Scheduling of Avionics Systems | |
| Dawn An* (KITECH) | ||
|
Th7R-2 P00025 (11:00 ~ 12:00) |
Advanced Electrochemical Properties of Co3O4@TiO2 Nanocomposite: A Dual Approach with Experimental and Computational Insights | |
| Sri Harisha Bairi, Bhargav Akkinepally, Jaesool Shim, and Jiseok Lim* (Yeungnam University) | ||
|
Th7R-3 P00051 (11:00 ~ 12:00) |
Introducing Piping Reliability Improvement by Displacement Measurement Device Using Transformation Spherical to Cartesian Coordinate in Power Generation Plant | |
| Chiyong Park* (Gyeongsang National University), Kio Song and Sungwoo Ha (KLES(Korea Leading Engineering System) Inc.), Sunyoung Cho (KLES(Korea Leading Engineering System) Inc) | ||
|
Th7R-4 P00041 (11:00 ~ 12:00) |
Structural Integrity Evaluation of Modified Valve in Nuclear Power Plant | |
| Jae-yoon Jeong* (KHNP CRI) | ||
|
Th7R-5 P00102 (11:00 ~ 12:00) |
Sensor-signal Feature-based Condition Management & Anomaly Detectionfor Flow Control Module | |
| Young Gi An (Korea Electronic Technology Institute), Jae-Seong Jeong* (Korea electronic technology Institute) | ||
|
Th7R-6 P00078 (11:00 ~ 12:00) |
NDE Techniques on the Defect Detection of CFRP Composites for a Use of Lightweight Mobility Using Ultrasonic Waves | |
| Kwang-Hee Im*, H Liang, X.L. Shi, and Y.D. woo (Woosuk University), Y.T. Cho (Jeonju University) | ||
|
Th7R-7 P00094 (11:00 ~ 12:00) |
Computational Analysis on The Thermal Behavior of EV Battery Modules Using Phase Change Materials | |
| Gwangmin Jung (Yeongnam University), Sein Oh (Korea Transportation SAFETY Authority), Kisoo Yoo* (University) | ||
|
Th7R-8 P00098 (11:00 ~ 12:00) |
High-Fidelity Modeling-Based Pressure Signature Analysis for Axial Piston Pump Fault Diagnosis | |
| Dabo Sim, Gil Hong, Seunghwan Lee, Jingyu Noh, Sangjun Park, and Sanghyun Park (Konkuk University), Jaeyoung Lee (Hyundai Rotem), Namsu Kim* (Konkuk University) | ||
|
Th7R-9 P00100 (11:00 ~ 12:00) |
Detection and Classification of Various Gear Faults in Planetary Gearboxes Using Current Signal of Drive Motor | |
| Jaewan Kim, Gil Hong, Seunghwan Lee, Jingyu Noh, Sangjun Park, and Sanghyun Park (Konkuk University), Jaeyoung Lee (Hyundai Rotem), Namsu Kim* (Konkuk University) | ||
|
Th7R-10 P00115 (11:00 ~ 12:00) |
Prognostics Method Development for Discrete IGBTs using Thermal Images and Convolutional Neural Networks | |
| Ernesto Miguel Andulana Coloso and Changwoon Han* (SUNY Korea) | ||
|
Th7R-11 P00104 (11:00 ~ 12:00) |
Research on the Development of Refurbished Batteries for 150kW EV Driving Systems | |
| Kangmin Lee (Yeungnam University), kisoo Yoo* (yeungnam university) | ||
|
Th7R-12 P00107 (11:00 ~ 12:00) |
A Study on The Applicability of Gaussian-Function-based Deconvolution Method in LIB Thermal Runaway Analysis | |
| Seongjun Joe and Kisoo Yoo* (Yeungnam University) | ||
|
Th7R-13 P00108 (11:00 ~ 12:00) |
Development of High-Resistant Polyimide Separator Improve Thermal Stability and Performance in Electric Vehicle Batteries | |
| Yurim Kim and kisoo Yoo* (Yeungnam University) | ||
|
Th7R-14 P00112 (11:00 ~ 12:00) |
Study on the Effect of Pressurized Structure for Battery Aging and Thermal Behavior in Pouch-type Batteries | |
| Daeun Lee and Kisoo Yoo* (Yeungnam University) | ||
|
Th7R-15 P00123 (11:00 ~ 12:00) |
Mechanical Behavior of Fuel Cell Electrode Depending on Relative Humidity | |
| Taejun Kang (Kongju National University), Kim Ji Hun and Kim Taek-Soo (Korea Advanced Institute of Science and Technology (KAIST)), Pyo Jae-Bum* (Kongju National University) | ||
|
Th7R-16 P00117 (11:00 ~ 12:00) |
Hygrothermal Behavior of Carbon-Based Electrode Film Induced by Dehydration of Lonomer Binder | |
| Won-Yong Jeong and Jae-Bum Pyo* (Kongju National University) | ||
|
Th7R-17 P00119 (11:00 ~ 12:00) |
A Study on a Digital Twin Model of Battery Pack for Integrated Thermal Control System in Elecric Vehicles | |
| Eonhyo Kim and Kisoo Yoo* (Yeungnam University) | ||
|
Th7R-18 P00120 (11:00 ~ 12:00) |
Temperature Mapping for Electronic Device Heat Sinks Using Deep Neural Networks and Local Thermocouple Sensors | |
| Jaehee Shin and Doohyun Han (Korea University of Technology and Education), Dong-Won Jang (Myongji University), Jinhyoung Park* (Korea University of Technology and Education) | ||
|
Th7R-19 P00121 (11:00 ~ 12:00) |
Development of a Self-Powered Door Lock System Using Triboelectric Nanogenerators for Enhanced Security Applications | |
| Doo Hyun Han, Jaehee Shin, and jinhyoung Park* (Korea University of Technology and Education) | ||
|
Th7R-20 P00157 (11:00 ~ 12:00) |
Nondestructive Testing for Reliability Assessments of 3D Printed Plastic Structures Using Thermography | |
| Farrel A. Nugraha and Arzuv Vepayeva (Korea Science Academy of KAIST), Young H. Kim* and Younho Cho (Pusan National University) | ||
|
Th7R-21 P00124 (11:00 ~ 12:00) |
Development of Prognostics and Health Management Frame Using Cumulative Damage Model with Iso-Damage Curve for IGBT in Electric Vehicles | |
| Junseop Lee and Changwoon Han* (SUNY Korea) | ||
|
Th7R-22 P00127 (11:00 ~ 12:00) |
Lifetime Prediction of Aluminum Electrolytic Capacitors Under Variable Thermal Loading Conditions for Prognostic Health Management | |
| Jaewon Lee (SUNY Korea), Changwoon Han* (The State University of New York, Korea) | ||
|
Th7R-23 P00128 (11:00 ~ 12:00) |
Multi-objective Optimal Design for Endurance Testing Using NSGA-2 Algorithm | |
| Inho Baek (Pusan National University), yoojeong Noh* (University), Young-Jin Kang (Research Institute of Mechanical Technology), Gyeong-Hun Lee (University), Jeonghwan Lee and Chi-Young Ryu (Agency for Defense Development) | ||
|
Th7R-24 P00138 (11:00 ~ 12:00) |
In-Situ Visualization and Mechanistic Analysis of Hydrogen Bubble Nucleation Distribution in Water Electrolysis | |
| Junbeom Lim (Hanyang University), Lenan Zhang (Cornell University), Rhokyun Kwak* (Hanyang University) | ||
|
Th7R-25 P00177 (11:00 ~ 12:00) |
Facile Synthesis of g-C3N4 Nanosheets Supported Co3O4/CeO2 Ternary Synergistic Heterostructures for High Performance Hybrid Supercapacitors | |
| Mule Vijayalakshmi, Wang Rui, and Jaesool Shim* (Yeungnam University) | ||
|
Th7R-26 P00159 (11:00 ~ 12:00) |
A Study on the Design of a Dedicated Safety Work Platform for the Maintenance of Desulfurization Absorber Spray Nozzles | |
| Jungkyu Hwang* (KLES Inc.), Tai Woo You, SeungWoo Ha, and SunYoung Cho (KLES INC.) | ||
|
Th7R-27 P00171 (11:00 ~ 12:00) |
Driving Reliability Analysis of an Unmanned Robot Vehicle Using Real-Time Simulator | |
| Da-In An and Jin-Ha Hwang (Pukyong National Univeristy), Jeong-Hyun Sohn* (Pukyong National University) | ||
|
Th7R-28 P00174 (11:00 ~ 12:00) |
Ni(OH)2@g-C3N4 Heterostructure as a Battery-Type Capacitive Cathode for High Power and Energy Density Energy Storage Devices | |
| Rui Wang, Ch. Venkata Reddy, and Jaesool Shim* (Yeungnam University) | ||
|
Th7R-29 P00175 (11:00 ~ 12:00) |
Bimetallic Ni-Co MOF@PAN Modified Electrospun Separator Enhances High-Performance Lithium-Sulfur Batteries | |
| Jie Zeng, Surya Veerendra Prabhakar Vattikuti, and Jaesool Shim* (Yeungnam University) | ||
|
Th7R-30 P00205 (11:00 ~ 12:00) |
Diagnosis of Bearing Failure Using Low-Cost Monitoring System and Deep Neural Network | |
| Handeul You, Dongyeon Kim, Juchan Kim, Keunu Park, and Sangjin Maeng* (Hongik University) | ||
|
Th7R-31 P00189 (11:00 ~ 12:00) |
Investigation of Electromigration Reliability and Resistivity Improvements in Cu-Based Alloy Interconnects | |
| Eunhee Lim, Jihyeon Lim, Yongin Yun, and Dongwoo Lee* (Sungkyunkwan University) | ||
|
Th7R-32 P00193 (11:00 ~ 12:00) |
Defect Detection in Containment Liner Plates Using Ultrasonic Guided Waves and Tomographic Imaging | |
| Maolin Li, Igor Sakhabiev, Younho Cho*, and Young H. Kim (Pusan National University) | ||
|
Th7R-33 P00203 (11:00 ~ 12:00) |
Standard Development of Common-Use Swappable Battery Pack for Electric Motorcycles and Mopeds | |
| Wae Gyeong Shin* (KATECH) | ||
|
Th7R-34 P00204 (11:00 ~ 12:00) |
Study of MS5803-02BA in a Prototype Developed with RTV-2 Silicone Rubber to Rehabilitate the Women Pelvic Floor | |
| Diana Antunes, Rita Arantes, Eurico Seabra*, Luís Silva, and Rui Viana (University of Minho) | ||
|
Th7R-35 P00242 (11:00 ~ 12:00) |
Transient Response of Temperature Sensitive Electrical Parameter as a Precursor of Solder Crack/Delamination | |
| Sungsoon Choi* (KETI) | ||
|
Th7R-36 P00213 (11:00 ~ 12:00) |
Generalized Zero-Shot Learning based Diagnosis of Compound Faults in Rotating Machinery | |
| Hwanin Oh and Joonha Jung* (Ajou University) | ||
|
Th7R-37 P00217 (11:00 ~ 12:00) |
Influence of Root Radius Characterization for Bearing Pad Fretting Flaws with Asymmetric Geometries on DHC Initiation in Zirconium Alloy Pressure Tubes | |
| Hunetae Kim* (KHNP), Hyeongdo Kweon (Korea Hydro & Nuclear Power CO., LTD, Central Research Institute) | ||
|
Th7R-38 P00219 (11:00 ~ 12:00) |
Vibration Damping Performance of Carbon Nanotubes-Embedded Rubber Composites | |
| Jaehan Lee and Kyunghoon Kim* (Sungkyunkwan University) | ||
|
Th7R-39 P00233 (11:00 ~ 12:00) |
Design and Automation of a Test Bench on Ball Valves | |
| Rui Costa (Vinco Valves SA), Eurico Seabra* (University of Minho) | ||
|
Th7R-40 P00245 (11:00 ~ 12:00) |
Development of Inspection History Management System for Power Plant Piping Supports | |
| Kio Song*, Daeseong Lee, and Seungwoo Ha (KLES), Sayong Lee (KETG), Juryong Woo and Jungwoo Kim (KOEN) | ||
|
Th7R-41 P00251 (11:00 ~ 12:00) |
The Estimation of Failure Mechanisms and Lifetime Prediction of Polymer-Based Heat Exchanger Housing | |
| Janggyun Lim* (KATECH), Se-Rim Lee, Myung Gyu Jung, and Shin Hwan Wei (Korea Automotive Technology Institute) | ||
|
Th7R-42 P00252 (11:00 ~ 12:00) |
FEM-Based Two-Stage Design for Optimal Design in Exhaust Gas Temperature Sensors | |
| Se-Rim Lee (KATECH), Myung Gyu Jung, Shin Hwan Wei, and Janggyun Lim* (Korea Automotive Technology Institute) | ||